ARCHORA / Resource library
Open resource library
Product data summaries and practical guides for selecting architectural coatings. Read online or download immediately, without an email form.
10 resources found
No resources match your search. Try another term or reset the filters.
Exterior Latex Paint
A smooth exterior wall finish for building facades and renovation specifications.
When to use this
Exterior walls. Discuss the substrate condition, color and compatible primer.
Key points
- Discuss the substrate condition, color and compatible primer.
- Theoretical coverage / consumption: Approximately 11 m²/L/coat
- Recommended coats: 2 coats
Read online
A compiled product summary, not a formally issued TDS, SDS or certification.
Technical data
| Property | Value | Test method / conditions | Document basis |
|---|---|---|---|
| Surface-dry time | 1 h | GB/T 9755-2014 | BETC-HJ-2024-P-00256 / 2024-05-26 |
| Contrast ratio (white and light colours) | 0.92 | GB/T 9755-2014 | BETC-HJ-2024-P-00256 / 2024-05-26 |
| Dirt pick-up resistance (white and light colours) | 8 % | GB/T 9755-2014 | BETC-HJ-2024-P-00256 / 2024-05-26 |
| Scrub resistance | No damage after 2000 cycles | GB/T 9755-2014 | BETC-HJ-2024-P-00256 / 2024-05-26 |
| Alkali resistance | No abnormality after 48 h | GB/T 9755-2014 | BETC-HJ-2024-P-00256 / 2024-05-26 |
| Water resistance | No abnormality after 96 h | GB/T 9755-2014 | BETC-HJ-2024-P-00256 / 2024-05-26 |
| Water permeability | 0.8 mL | GB/T 9755-2014 | BETC-HJ-2024-P-00256 / 2024-05-26 |
| Artificial weathering | 400 h; no blistering, peeling or cracking; chalking 0, colour change 0 | GB/T 9755-2014 | BETC-HJ-2024-P-00256 / 2024-05-26 |
Application & system
| Property | Value | Test method / conditions | Document basis |
|---|---|---|---|
| Theoretical coverage / consumption | Approximately 11 m²/L/coat | Source document | Manual V3 2026-07-09 |
| Recommended coats | 2 coats | Source document | Manual V3 2026-07-09 |
| Application method | Roller or airless spray | Source document | Manual V3 2026-07-09 |
| Application temperature | 5–35 °C | Source document | Manual V3 2026-07-09 |
| Relative humidity | ≤85 % | Source document | Manual V3 2026-07-09 |
| Recoat / clear-coat interval | ≥4 h at 25°C | Source document | Manual V3 2026-07-09 |
Source and scope
Original reports may show the manufacturer's other brand name. The company confirms that the corresponding ARCHORA products use the same formulation and specifications. Manufacturer's manual data is not an independent test report. Reported results apply to the submitted sample and stated test conditions; they do not establish performance on every job site or constitute international certification.
Elastomeric Exterior Coating
An elastomeric coating option for exterior wall systems that require a flexible finish.
When to use this
Exterior wall coating systems. Describe the wall condition and any existing cracks so the preparation and coating approach can be reviewed.
Key points
- Describe the wall condition and any existing cracks so the preparation and coating approach can be reviewed.
- Theoretical coverage / consumption: 2.5–3.5 m²/kg
- Recommended coats: 2 coats
Read online
A compiled product summary, not a formally issued TDS, SDS or certification.
Technical data
No verified test results are listed for this product. See the manufacturer’s application information below.
Application & system
| Property | Value | Test method / conditions | Document basis |
|---|---|---|---|
| Theoretical coverage / consumption | 2.5–3.5 m²/kg | Source document | Manual V3 2026-07-09 |
| Recommended coats | 2 coats | Source document | Manual V3 2026-07-09 |
| Application method | Roller or airless spray | Source document | Manual V3 2026-07-09 |
| Application temperature | 5–35 °C | Source document | Manual V3 2026-07-09 |
| Relative humidity | ≤85 % | Source document | Manual V3 2026-07-09 |
| Recoat / clear-coat interval | 4–6 h at 25°C | Source document | Manual V3 2026-07-09 |
Source and scope
Original reports may show the manufacturer's other brand name. The company confirms that the corresponding ARCHORA products use the same formulation and specifications. Manufacturer's manual data is not an independent test report. Reported results apply to the submitted sample and stated test conditions; they do not establish performance on every job site or constitute international certification.
Solar Heat-Reflective Coating
A coating option for building surfaces where solar heat reflection is part of the specification.
When to use this
Exterior building surfaces. Discuss the exposure, substrate, color and relevant test documentation for the intended application.
Key points
- Discuss the exposure, substrate, color and relevant test documentation for the intended application.
- Theoretical coverage / consumption: 0.5–0.8 kg/m²
- Recommended coats: 2–3 coats
Read online
A compiled product summary, not a formally issued TDS, SDS or certification.
Technical data
No verified test results are listed for this product. See the manufacturer’s application information below.
Application & system
| Property | Value | Test method / conditions | Document basis |
|---|---|---|---|
| Theoretical coverage / consumption | 0.5–0.8 kg/m² | Source document | Manual V3 2026-07-09 |
| Recommended coats | 2–3 coats | Source document | Manual V3 2026-07-09 |
| Application method | Airless spray recommended | Source document | Manual V3 2026-07-09 |
| Application temperature | 5–35 °C | Source document | Manual V3 2026-07-09 |
| Relative humidity | ≤85 % | Source document | Manual V3 2026-07-09 |
| Recoat / clear-coat interval | ≥4 h at 25°C | Source document | Manual V3 2026-07-09 |
Source and scope
Original reports may show the manufacturer's other brand name. The company confirms that the corresponding ARCHORA products use the same formulation and specifications. Manufacturer's manual data is not an independent test report. Reported results apply to the submitted sample and stated test conditions; they do not establish performance on every job site or constitute international certification.
Multicolor Stone-Effect Coating
A water-in-water decorative coating for multicolor, stone-like exterior finishes.
When to use this
Decorative exterior walls. Confirm the sample color, pattern scale, base color and supporting layers.
Key points
- Confirm the sample color, pattern scale, base color and supporting layers.
- Theoretical coverage / consumption: 0.4–0.8 kg/m²
- Recommended coats: 1 coat
Read online
A compiled product summary, not a formally issued TDS, SDS or certification.
Technical data
| Property | Value | Test method / conditions | Document basis |
|---|---|---|---|
| Surface-dry time | <4 h | HG/T 4343-2012; GB/T 1728-1979, GB/T 9265-2009, GB/T 1733-1993, GB/T 9266-2009, GB/T 1865-2009 (as listed in the report) | TL12L-240008 / 2024-07-10 |
| Alkali resistance (composite coating) | No abnormality after 48 h | HG/T 4343-2012; GB/T 1728-1979, GB/T 9265-2009, GB/T 1733-1993, GB/T 9266-2009, GB/T 1865-2009 (as listed in the report) | TL12L-240008 / 2024-07-10 |
| Water resistance (composite coating) | No abnormality after 96 h | HG/T 4343-2012; GB/T 1728-1979, GB/T 9265-2009, GB/T 1733-1993, GB/T 9266-2009, GB/T 1865-2009 (as listed in the report) | TL12L-240008 / 2024-07-10 |
| Scrub resistance (composite coating) | >2000 cycles | HG/T 4343-2012; GB/T 1728-1979, GB/T 9265-2009, GB/T 1733-1993, GB/T 9266-2009, GB/T 1865-2009 (as listed in the report) | TL12L-240008 / 2024-07-10 |
| Acid rain resistance (composite coating) | No abnormality after 48 h | HG/T 4343-2012; GB/T 1728-1979, GB/T 9265-2009, GB/T 1733-1993, GB/T 9266-2009, GB/T 1865-2009 (as listed in the report) | TL12L-240008 / 2024-07-10 |
| Dirt pick-up resistance (composite coating) | 1 grade | HG/T 4343-2012; GB/T 1728-1979, GB/T 9265-2009, GB/T 1733-1993, GB/T 9266-2009, GB/T 1865-2009 (as listed in the report) | TL12L-240008 / 2024-07-10 |
| Artificial weathering (composite coating) | No blistering, peeling, cracking, chalking or obvious colour/gloss change after 1000 h | HG/T 4343-2012; GB/T 1728-1979, GB/T 9265-2009, GB/T 1733-1993, GB/T 9266-2009, GB/T 1865-2009 (as listed in the report) | TL12L-240008 / 2024-07-10 |
Application & system
| Property | Value | Test method / conditions | Document basis |
|---|---|---|---|
| Theoretical coverage / consumption | 0.4–0.8 kg/m² | Source document | Manual V3 2026-07-09 |
| Recommended coats | 1 coat | Source document | Manual V3 2026-07-09 |
| Application method | Dedicated multicolor spray gun | Source document | Manual V3 2026-07-09 |
| Application temperature | 5–35 °C | Source document | Manual V3 2026-07-09 |
| Relative humidity | ≤85 % | Source document | Manual V3 2026-07-09 |
| Recoat / clear-coat interval | ≥24 h before clear coat at 25°C | Source document | Manual V3 2026-07-09 |
Source and scope
Original reports may show the manufacturer's other brand name. The company confirms that the corresponding ARCHORA products use the same formulation and specifications. Manufacturer's manual data is not an independent test report. Reported results apply to the submitted sample and stated test conditions; they do not establish performance on every job site or constitute international certification.
Textured Stone-Effect Coating
A sand-textured multicolor coating for a stone-like exterior appearance.
When to use this
Textured decorative facades. Review a physical sample to confirm the texture, color and intended surface effect.
Key points
- Review a physical sample to confirm the texture, color and intended surface effect.
- Theoretical coverage / consumption: 3.5–5 kg/m²
- Recommended coats: 1 coat
Read online
A compiled product summary, not a formally issued TDS, SDS or certification.
Technical data
| Property | Value | Test method / conditions | Document basis |
|---|---|---|---|
| Surface-dry time | 3 h | JG/T 24-2000, W type | BETC-HJ-2024-P-00257 / 2024-06-07 (issued); results dated 2024-06-01 |
| Water resistance | No blistering, cracking, peeling or colour change after 96 h | JG/T 24-2000, W type | BETC-HJ-2024-P-00257 / 2024-06-07 (issued); results dated 2024-06-01 |
| Alkali resistance | No blistering, cracking, peeling or colour change after 96 h | JG/T 24-2000, W type | BETC-HJ-2024-P-00257 / 2024-06-07 (issued); results dated 2024-06-01 |
| Bond strength (standard condition) | 0.78 MPa | JG/T 24-2000, W type | BETC-HJ-2024-P-00257 / 2024-06-07 (issued); results dated 2024-06-01 |
| Bond strength after water immersion | 0.51 MPa | JG/T 24-2000, W type | BETC-HJ-2024-P-00257 / 2024-06-07 (issued); results dated 2024-06-01 |
| Dirt pick-up resistance (5 cycles) | 1 grade | JG/T 24-2000, W type | BETC-HJ-2024-P-00257 / 2024-06-07 (issued); results dated 2024-06-01 |
| Temperature cycling resistance | No chalking, cracking, peeling, blistering or colour change after 10 cycles | JG/T 24-2000, W type | BETC-HJ-2024-P-00257 / 2024-06-07 (issued); results dated 2024-06-01 |
| Artificial weathering | 500 h; no cracking, blistering or peeling; chalking 0, colour change 0 | JG/T 24-2000, W type | BETC-HJ-2024-P-00257 / 2024-06-07 (issued); results dated 2024-06-01 |
Application & system
| Property | Value | Test method / conditions | Document basis |
|---|---|---|---|
| Theoretical coverage / consumption | 3.5–5 kg/m² | Source document | Manual V3 2026-07-09 |
| Recommended coats | 1 coat | Source document | Manual V3 2026-07-09 |
| Application method | Dedicated stone-effect spray gun | Source document | Manual V3 2026-07-09 |
| Application temperature | 5–35 °C | Source document | Manual V3 2026-07-09 |
| Relative humidity | ≤85 % | Source document | Manual V3 2026-07-09 |
| Recoat / clear-coat interval | ≥48 h before clear coat | Source document | Manual V3 2026-07-09 |
Source and scope
Original reports may show the manufacturer's other brand name. The company confirms that the corresponding ARCHORA products use the same formulation and specifications. Manufacturer's manual data is not an independent test report. Reported results apply to the submitted sample and stated test conditions; they do not establish performance on every job site or constitute international certification.
Alkali-Resistant Sealing Primer
A supporting primer used before the specified wall coating finish.
When to use this
Wall coating preparation. Match the primer to the substrate and the selected finish; confirm preparation requirements.
Key points
- Match the primer to the substrate and the selected finish; confirm preparation requirements.
- Theoretical coverage / consumption: 0.10–0.15 kg/m²
- Recommended coats: 1 coat
Read online
A compiled product summary, not a formally issued TDS, SDS or certification.
Technical data
| Property | Value | Test method / conditions | Document basis |
|---|---|---|---|
| Surface-dry time (alkali-resistant sealer) | 1 h | GB/T 9755-2014, Table 1, exterior primer type II | BETC-HJ-2024-P-00255 / 2024-04-24 |
| Alkali resistance (alkali-resistant sealer) | No abnormality after 48 h | GB/T 9755-2014, Table 1, exterior primer type II | BETC-HJ-2024-P-00255 / 2024-04-24 |
| Water resistance (alkali-resistant sealer) | No abnormality after 96 h | GB/T 9755-2014, Table 1, exterior primer type II | BETC-HJ-2024-P-00255 / 2024-04-24 |
| Water permeability (alkali-resistant sealer) | 0.5 mL | GB/T 9755-2014, Table 1, exterior primer type II | BETC-HJ-2024-P-00255 / 2024-04-24 |
| Efflorescence resistance (alkali-resistant sealer) | No abnormality after 48 h | GB/T 9755-2014, Table 1, exterior primer type II | BETC-HJ-2024-P-00255 / 2024-04-24 |
| Surface-dry time (anti-fungal variant) | <2 h | GB/T 1728-1979(1989) | TL226-240939 / 2024-07-02 |
| Fungal resistance (anti-fungal variant) | 0 grade | GB/T 1741-2007, 28-day culture-dish method | TL226-240939 / 2024-07-02 |
| Water permeability (anti-fungal variant) | 0.3 mL | JG/T 210-2018 | TL226-240939 / 2024-07-02 |
| Efflorescence resistance (anti-fungal variant) | No abnormality after 120 h | JG/T 210-2018 | TL226-240939 / 2024-07-02 |
Application & system
| Property | Value | Test method / conditions | Document basis |
|---|---|---|---|
| Theoretical coverage / consumption | 0.10–0.15 kg/m² | Source document | Manual V3 2026-07-09 |
| Recommended coats | 1 coat | Source document | Manual V3 2026-07-09 |
| Application method | Brush, roller or spray | Source document | Manual V3 2026-07-09 |
| Application temperature | 5–35 °C | Source document | Manual V3 2026-07-09 |
| Relative humidity | ≤85 % | Source document | Manual V3 2026-07-09 |
| Recoat / clear-coat interval | Allow to dry fully; typically 4–12 h depending on weather | Source document | Manual V3 2026-07-09 |
Source and scope
Original reports may show the manufacturer's other brand name. The company confirms that the corresponding ARCHORA products use the same formulation and specifications. Manufacturer's manual data is not an independent test report. Reported results apply to the submitted sample and stated test conditions; they do not establish performance on every job site or constitute international certification.
Washable Interior Latex Paint
A washable interior wall finish for residential and commercial spaces.
When to use this
Interior walls. Discuss the room use, substrate, color, finish and cleaning requirements.
Key points
- Discuss the room use, substrate, color, finish and cleaning requirements.
- Theoretical coverage: Approximately 12 m²/L/coat
- Recommended coats: 1–2 coats
Read online
A compiled product summary, not a formally issued TDS, SDS or certification.
Technical data
| Property | Value | Test method / conditions | Document basis |
|---|---|---|---|
| VOC | 92 g/L | GB 18582-2008 (as printed in the report); no US EPA 24 claim | BETC-HJ-2024-D-00258 / 2024-05-27 |
| Free formaldehyde | 21 mg/kg | GB 18582-2008 (as printed in the report); no US EPA 24 claim | BETC-HJ-2024-D-00258 / 2024-05-27 |
| Soluble lead | 5 mg/kg | GB 18582-2008 (as printed in the report); no US EPA 24 claim | BETC-HJ-2024-D-00258 / 2024-05-27 |
| Sum of benzene, toluene, ethylbenzene and xylenes | Not detected (limit 50 mg/kg) | GB 18582-2008 (as printed in the report); no US EPA 24 claim | BETC-HJ-2024-D-00258 / 2024-05-27 |
| Soluble cadmium, chromium and mercury | Not detected | GB 18582-2008 (as printed in the report); no US EPA 24 claim | BETC-HJ-2024-D-00258 / 2024-05-27 |
Application & system
| Property | Value | Test method / conditions | Document basis |
|---|---|---|---|
| Theoretical coverage | Approximately 12 m²/L/coat | Source document | Manual V2 2026-07-09 |
| Recommended coats | 1–2 coats | Source document | Manual V2 2026-07-09 |
| Application method | Roller or airless spray | Source document | Manual V2 2026-07-09 |
| Minimum application temperature | 10 °C | Source document | Manual V2 2026-07-09 |
| Maximum relative humidity | 80 % | Source document | Manual V2 2026-07-09 |
| Recoat interval | ≥2 h at 25°C | Source document | Manual V2 2026-07-09 |
| Cure before heavy cleaning | 14 days | Source document | Manual V2 2026-07-09 |
Source and scope
Original reports may show the manufacturer's other brand name. The company confirms that the corresponding ARCHORA products use the same formulation and specifications. Manufacturer's manual data is not an independent test report. Reported results apply to the submitted sample and stated test conditions; they do not establish performance on every job site or constitute international certification.
How to read coating data and test reports
Understand what a product summary, TDS, SDS and test report can tell you.
When to use this
For buyers and project teams comparing documents before selecting a coating.
Key points
- Check the exact product and document revision.
- Read each result together with its method and sample conditions.
- Keep application guidance and independent test results separate.
Read online
Start with the product identity
Match the product name, model and intended use to the material being considered. Original manufacturer reports may use another brand name; the company has confirmed that the corresponding ARCHORA products use the same formulation and specifications.
Read the evidence with the result
A test value belongs to a submitted sample and stated test method. Compare like-for-like methods and conditions. A result in one report does not by itself establish performance at every site or international certification.
Use each document for its purpose
The TDS describes product use and application information. The SDS addresses hazards, handling and protective measures. A test report records results under its stated conditions. This library’s compiled summaries identify their sources and do not replace formally issued documents.
Before specification
Confirm the current document revision and any unlisted data with the technical team. Keep the agreed substrate, system and site conditions with the project record.
Source and scope
Editorial learning guide based on ARCHORA Product Manual V3 (2026-07-09) and the document types described in this resource library. Quantity formulas are arithmetic planning aids.
Plan the complete coating system
A practical sequence from substrate assessment to the approved finish sample.
When to use this
For a new facade or refurbishment brief, before ordering separate coating layers.
Key points
- Identify the substrate and its condition.
- Confirm preparation, compatible primer and finish together.
- Approve the colour and texture on a physical sample.
Read online
Define the starting surface
Record whether the work is interior or exterior, the substrate, its present condition, the area and exposure conditions. Include existing coatings when planning refurbishment.
Confirm the layer sequence
The manual’s sequence is substrate assessment, preparation and levelling, compatible primer, then the finish. Add a protective topcoat only where the selected system requires it.
Make the sample part of selection
Screen colour and texture images are indicative. Confirm the appearance with a physical sample and agree the substrate and application method for the project.
Keep the application information product-specific
Use the product’s own temperature, humidity, coat count and recoat information. Do not transfer one product’s coverage or timing to every layer in the system.
Source and scope
Editorial learning guide based on ARCHORA Product Manual V3 (2026-07-09) and the document types described in this resource library. Quantity formulas are arithmetic planning aids.
From theoretical coverage to a purchase estimate
Keep coverage, consumption, coat count and purchasing units consistent.
When to use this
For early material planning and a clearer quantity enquiry.
Key points
- Check whether the unit is m²/L/coat or kg/m².
- Include the number of coats in the calculation.
- Confirm practical consumption and packaging before ordering.
Read online
Read the unit first
Coverage expressed in m²/L/coat is an area covered by one litre in one coat. Consumption expressed in kg/m² is a mass per area. Do not interchange litres and kilograms without a confirmed product density.
Calculate on a consistent basis
For coverage in m²/L/coat, theoretical litres = area × number of coats ÷ coverage. If consumption is given per coat, multiply by coat count; if it is stated for the full system, do not count the coats again.
Confirm the purchase quantity
Theoretical values do not include every site loss. Substrate absorption, texture and application method can affect practical use. Share the area, substrate, desired finish and packaging requirements with the technical team before fixing the purchase quantity.
Source and scope
Editorial learning guide based on ARCHORA Product Manual V3 (2026-07-09) and the document types described in this resource library. Quantity formulas are arithmetic planning aids.
Related learning
Questions about these resources
Do I need to leave an email address?
No. All resources listed here can be read and downloaded directly.
Are the summaries formal TDS or SDS documents?
No. They are public summaries compiled from the stated manual and test evidence. Request the current formally issued TDS or SDS for product-specific project use.
Why do original reports show another brand?
The company has confirmed that the corresponding ARCHORA products and the original manufacturer-branded samples use the same formulation and specifications.
Can a screen image confirm the final colour?
No. Confirm colour and texture with a physical sample under the intended viewing conditions.