ARCHORA / Exterior coatings / KY-1010
High-weatherability exterior latex paint
An acrylic exterior wall finish for a smooth, coloured facade, used over a compatible alkali-resistant primer.
Original Chinese brochure · 6 pages · 3.9 MB

Technical parameters
Source: supplied ARCHORA printed product handbook. PDF page 50. Manufacturer brochure data. Listed methods are reproduced as printed; this table is not an independent laboratory report.
| Property | Method listed in brochure | Brochure criterion | Brochure result |
|---|---|---|---|
| Surface-dry time | GB/T 9755 / GB/T 1728 | ≤2 h | 1 h |
| Contrast ratio | GB/T 9755 / ISO 6504-3 | ≥0.90 | 0.92 |
| Dirt pick-up resistance | GB/T 9780 | ≤15% | 8% |
| Scrub resistance | GB/T 9266 / ASTM D-2486 | 2000 cycles; No damage | 2000 cycles; No damage |
| Alkali resistance | GB/T 9265 / ASTM D-1308 | 48 h; No abnormality | No abnormality |
| Water resistance | GB/T 1733 | 96 h; No abnormality | No abnormality |
| Temperature cycling | GB/T 9755 / ASTM E-2485 | 3 cycles; No abnormality | No abnormality |
| Water permeability | GB/T 9755 | ≤1.0 mL | 0.8 mL |
| Artificial weathering | GB/T 1865 / ASTM G-154 | 400 h; No blistering, peeling or cracking | Pass; Chalking 0; colour change 0 |
Application illustrations
AI application illustrations from the product handbook. Confirm the finish with a physical sample.
Colour & texture references

Brochure colour and texture references; screen appearance is indicative. Confirm against a physical sample.
Coating system
Application & specification
| Property | Brochure value | PDF page |
|---|---|---|
| Theoretical consumption / coverage | ≈11 m²/L/coat | 50 |
| Packaging stated in brochure | 5 gal / 19 L | 50 |
| Shelf life stated in brochure | Unopened: 12 months | 50 |
Read the original system, technical and installation pages
Original Chinese pages, including complete preparation, specification, application and storage instructions. Open an image to read it at full size.
Documents & downloads
KY-1010 · High-weatherability exterior latex paint
Original Chinese brochure · 6 pages · 3.9 MB
Download complete handbook ↓Original Chinese brochure · 80 pages · 50.0 MB
Discuss this product ↗Other published reference data and documents
Earlier website reference material is retained below with its original document basis. For conflicting values, confirm the current product specification.
Technical data
| Property | Value | Test method / conditions | Document basis |
|---|---|---|---|
| Surface-dry time | 1 h | GB/T 9755-2014 | BETC-HJ-2024-P-00256 / 2024-05-26 |
| Contrast ratio (white and light colours) | 0.92 | GB/T 9755-2014 | BETC-HJ-2024-P-00256 / 2024-05-26 |
| Dirt pick-up resistance (white and light colours) | 8 % | GB/T 9755-2014 | BETC-HJ-2024-P-00256 / 2024-05-26 |
| Scrub resistance | No damage after 2000 cycles | GB/T 9755-2014 | BETC-HJ-2024-P-00256 / 2024-05-26 |
| Alkali resistance | No abnormality after 48 h | GB/T 9755-2014 | BETC-HJ-2024-P-00256 / 2024-05-26 |
| Water resistance | No abnormality after 96 h | GB/T 9755-2014 | BETC-HJ-2024-P-00256 / 2024-05-26 |
| Water permeability | 0.8 mL | GB/T 9755-2014 | BETC-HJ-2024-P-00256 / 2024-05-26 |
| Artificial weathering | 400 h; no blistering, peeling or cracking; chalking 0, colour change 0 | GB/T 9755-2014 | BETC-HJ-2024-P-00256 / 2024-05-26 |
Original reports may show the manufacturer's other brand name. The company confirms that the corresponding ARCHORA products use the same formulation and specifications.
Manufacturer's manual data is not an independent test report. Reported results apply to the submitted sample and stated test conditions; they do not establish performance on every job site or constitute international certification.
Application & system
| Property | Value | Test method / conditions | Document basis |
|---|---|---|---|
| Theoretical coverage / consumption | Approximately 11 m²/L/coat | Source document | Manual V3 2026-07-09 |
| Recommended coats | 2 coats | Source document | Manual V3 2026-07-09 |
| Application method | Roller or airless spray | Source document | Manual V3 2026-07-09 |
| Application temperature | 5–35 °C | Source document | Manual V3 2026-07-09 |
| Relative humidity | ≤85 % | Source document | Manual V3 2026-07-09 |
| Recoat / clear-coat interval | ≥4 h at 25°C | Source document | Manual V3 2026-07-09 |
Confirm the full system for the substrate and project conditions. A protective topcoat is not required for every product.
Documents
Product bulletin / TDS
Product properties, uses, application conditions and storage instructions.
Safety data sheet (SDS)
Hazards, handling, protective measures and other safety information.
Test report
Results for the submitted sample under the stated test conditions.
Website data summary; not a formally issued TDS.
Contact us to confirm the latest TDS and any data not listed here.
Technical data & source documents
Technical transcription · English / Chinese · 38 KB
Original Chinese PDF ↗






