400-880-4396 +86 138 8989 9165info@archoragroup.comJournalWhite papers & resources
ARCHORABuilding with Confidence, Protecting the Future.

ARCHORA / All products

Decorative panels

Choose the material and finish for your project. Our team can help confirm the compatible system and product specification.

Choose the material and finish for your project. Our team can help confirm the compatible system and product specification.

Discuss specification ↗

Technical data & source documents

Product-specific tables, with the source and sample scope kept alongside each value.

Panel systems: finishes, details & documents

Explore four finish families and five component types, with application illustrations, original swatch references and a technical planning manual.

Technical & installation manual

21 pages · 6.7 MB · English / Chinese

Download PDF ↓

The reports describe individual tested specimens. They do not automatically certify every finish, thickness, trim or installed assembly.

Product & component details

Detailed guidance · English / Chinese

Wood-grain panel
AI application illustration. Confirm the supplied finish with a physical sample.

Wood-grain panel

Decorative wood grain for warm, continuous interior walls.

木纹饰面形成温暖、连续的室内墙面。

Applications

Reception areas, living rooms, guestrooms and feature walls.

接待区、客厅、客房及背景墙。

Selection & specification

Agree grain direction, sequence, batch colour and joint rhythm before cutting.

裁切前确认木纹方向、排版顺序、批次色差及拼缝节奏。

Product guide PDF ↓
Wood-grain panel · archive p.21
p. 21
Wood-grain panel · archive p.22
p. 22
Wood-grain panel · archive p.23
p. 23

Archived swatch reference. Source: 康森帝尔A板材样册. Page numbers refer to that catalogue; availability and supply codes require sample confirmation.

Stone-grain panel
AI application illustration. Confirm the supplied finish with a physical sample.

Stone-grain panel

Stone-effect decoration with planned panel joints.

通过饰面呈现石纹效果,并以板幅安排分缝。

Applications

Lobbies, reception backdrops, feature walls and circulation areas.

大堂、前台背景、形象墙及交通空间。

Selection & specification

Approve the complete vein layout. Book matching is only available when the ordered sheets support it.

确认整面纹理排版;只有订货板面具备对应纹理时才采用对纹。

Product guide PDF ↓
Stone-grain panel · archive p.24
p. 24
Stone-grain panel · archive p.25
p. 25
Stone-grain panel · archive p.26
p. 26

Archived swatch reference. Source: 康森帝尔A板材样册. Page numbers refer to that catalogue; availability and supply codes require sample confirmation.

Fabric-texture panel
AI application illustration. Confirm the supplied finish with a physical sample.

Fabric-texture panel

Fine woven texture on a decorative panel surface.

装饰板表面呈现细腻织物纹理。

Applications

Guestrooms, meeting rooms, lounges and residential wall areas.

客房、会议室、休息区及住宅墙面。

Selection & specification

Check texture direction under the actual lighting; do not describe the finish as acoustic fabric.

在实际灯光下确认纹理方向;布纹外观不等于吸声软包。

Product guide PDF ↓
Fabric-texture panel · archive p.3
p. 3
Fabric-texture panel · archive p.7
p. 7
Fabric-texture panel · archive p.12
p. 12

Archived swatch reference. Source: 康森帝尔A板材样册. Page numbers refer to that catalogue; availability and supply codes require sample confirmation.

Solid-colour panel
AI application illustration. Confirm the supplied finish with a physical sample.

Solid-colour panel

A restrained colour surface with clearly coordinated joints and trims.

以纯色饰面、统一拼缝和收口形成简洁墙面。

Applications

Offices, common areas, study rooms and minimalist interiors.

办公、公共空间、书房及简约风格室内。

Selection & specification

Approve colour and gloss on a physical sample; confirm batches together under project lighting.

以实物样板确认颜色与光泽,同一空间在项目灯光下核对批次。

Product guide PDF ↓
Solid-colour panel · archive p.18
p. 18
Solid-colour panel · archive p.28
p. 28
Solid-colour panel · archive p.29
p. 29

Archived swatch reference. Source: 康森帝尔A板材样册. Page numbers refer to that catalogue; availability and supply codes require sample confirmation.

Browse all 36 archived finish pages

Archived swatch reference. Source: 康森帝尔A板材样册. Page numbers refer to that catalogue; availability and supply codes require sample confirmation.

Archive p. 3
p. 3
Archive p. 4
p. 4
Archive p. 5
p. 5
Archive p. 6
p. 6
Archive p. 7
p. 7
Archive p. 8
p. 8
Archive p. 9
p. 9
Archive p. 10
p. 10
Archive p. 11
p. 11
Archive p. 12
p. 12
Archive p. 13
p. 13
Archive p. 14
p. 14
Archive p. 15
p. 15
Archive p. 16
p. 16
Archive p. 17
p. 17
Archive p. 18
p. 18
Archive p. 19
p. 19
Archive p. 20
p. 20
Archive p. 21
p. 21
Archive p. 22
p. 22
Archive p. 23
p. 23
Archive p. 24
p. 24
Archive p. 25
p. 25
Archive p. 26
p. 26
Archive p. 27
p. 27
Archive p. 28
p. 28
Archive p. 29
p. 29
Archive p. 30
p. 30
Archive p. 31
p. 31
Archive p. 32
p. 32
Archive p. 33
p. 33
Archive p. 34
p. 34
Archive p. 35
p. 35
Archive p. 36
p. 36
Archive p. 37
p. 37
Archive p. 38
p. 38

Installation planning

Detailed guidance · English / Chinese

Installation planning
Conceptual component / installation schematic. Not to scale; confirm the actual profile and fixing detail.
  1. Survey & specify

    Record the base, room use, moisture exposure, openings and service routes. Resolve water ingress and unsound surfaces before covering. Agree the exact board and installation system.

    记录基层、空间用途、潮湿暴露、洞口和管线;先处理渗水与松散基层,再确认具体板材及安装体系。

  2. Set out & approve

    Measure the wall, plan joints and trims, and dry-lay panels by colour and grain. Approve a sample junction before the main installation.

    测量墙面、安排拼缝和收口,按花色与纹理预排,先确认样板及节点再大面积安装。

  3. Prepare the base

    Use a sound, clean and suitably flat base. Where a support frame is needed, design its anchorage, spacing and corrosion protection for the project.

    基层应牢固、清洁并满足平整要求;需龙骨时按项目设计锚固、间距和防腐措施。

  4. Fix panels

    Use the fixing method confirmed for the supplied panel. For bonding, check panel/base compatibility and follow the adhesive instructions. For mechanical fixing, use the approved clips or screws and support layout.

    采用与供货板材一致的固定方式;胶粘时确认板背与基层兼容并遵守胶粘剂说明,机械固定时按确认的卡件、螺钉及支承排布施工。

  5. Finish junctions

    Provide the movement allowance specified for the panel and site conditions; do not force boards into place. Coordinate corners, floor edges, doors and service openings.

    按板材及现场条件预留经确认的伸缩余量,不强行挤压安装;协调转角、墙脚、门洞和设备洞口。

  6. Inspect & maintain

    Check alignment, secure fixing, seams and surface condition. Clean gently with a soft cloth and a finish-compatible cleaner tested in a hidden area. Keep the approved sample and batch record.

    检查垂直度、固定、拼缝和表面,以软布及经隐蔽处试验的适用清洁剂清洁,留存确认样板和批次记录。

Ordering & system checklist
Product & finish
Exact model, finish code, batch and physical approval sample.
具体型号、花色编码、批次及确认实物样板。
Geometry
Length, width, thickness, section, edge type and agreed tolerances.
长宽厚、截面、边型及约定公差。
System
Base, supports, anchors, clips or adhesive, trims and movement details.
基层、支承、锚件、卡件或胶、收口及伸缩节点。
Performance
Match each report to the supplied model, finish, thickness and assembly.
逐份确认报告与供货型号、饰面、厚度及构造的适用关系。
Delivery
Quantity, cutting plan, packing, spare panels and care instructions.
数量、裁切计划、包装、备用板及维护说明。

Standards & specification references

Detailed guidance · English / Chinese · 2026-10-10

External references for specification planning; these values are not Kangyi test results or an ARCHORA supply guarantee. T/ZZB values refer to the paper/film-faced category.

外部资料用于选型与技术对标,不是康亿实测值或雅筑朗供货承诺;T/ZZB 指标对应纸膜类饰面。

Standard editions & limits / 标准版本与限值
GB/T 24137-2009
Current wood-plastic decorative board standard; also the basis named in the 2024 physical report. [S1]
现行木塑装饰板标准;亦为 2024 年理化报告所列依据。
GB 18580-2025
Effective 2026-06-01, replacing 2017. In its scope: wood-based panels ≤0.124 mg/m³ (E1); their finished products ≤0.050 mg/m³ (E0). Confirm classification and specimen preparation for the supplied material. [S2–S3]
2026-06-01 实施并代替 2017 版;适用范围内,人造板限量 ≤0.124 mg/m³(E1),人造板制品 ≤0.050 mg/m³(E0)。供货材料的适用分类与制样要求须核实。
GB 8624-2012 / 2025
The 2024 fire report uses 2012. The 2025 edition takes effect on 2027-01-01; it is not yet in force on this review date. [S4]
现有 2024 年燃烧报告依据 2012 版;2025 版于 2027-01-01 实施,本次检索日尚未实施。
JGJ/T 478-2019
Publisher lists it as current. Use the applicable interior-wall design, construction and acceptance provisions when developing the project system. [S9]
出版方列为现行;项目构造设计应核对其中适用的室内墙面设计、施工与验收条款。

Keep the 2024 results and original criteria unchanged. The 0.023 mg/m³ result does not itself establish E0/ENF certification or compliance under a later test edition.
保留 2024 年实测结果与原报告判据;0.023 mg/m³ 数值本身不等于 E0/ENF 认证,也不能直接替代新版条件下的检测结论。

14 industry benchmark parameters / 14 项行业对标参数

T/ZZB 1671-2025 · Tables 3–4 [S5]. Paper / film-faced category. External reference, not an ARCHORA conformity claim. / 纸膜饰面类对标,不是本产品合格声明。

Parameter / 项目UnitReference / 对标值
Length deviation / 长度偏差mm0 to +3
Thickness deviation / 厚度偏差mm±0.3
Width deviation / 宽度偏差mm±1
Diagonal difference / 对角线差mm≤3.5
Flatness / 平整度mm≤0.5
Assembled seam / 拼缝间距mm≤0.3
Density / 密度g/cm³0.8–1.1
Moisture content / 含水率%≤1.2
Flexural strength / 抗弯强度MPaMean ≥20; minimum ≥16
Flexural modulus / 抗弯弹性模量MPa≥1800
Dimensional stability / 尺寸稳定性%≤0.4
Shore hardness / 邵氏硬度HD≥58
Thickness swelling / 吸水厚度膨胀率%≤0.3
Surface bond / 表面胶合强度MPa≥0.5

Kangyi recorded hardness: HD 57; benchmark: HD ≥58. Do not assume group-standard conformity. The assembled seam criterion is not a site movement allowance. / 康亿实测硬度 HD 57,对标值 HD ≥58,不能据此推定符合团体标准;拼缝指标不等于现场伸缩缝。

Size & installation references / 规格与施工参考
Recorded Kangyi specimen / 康亿送检规格
2800 × 600 × 9 mm
2024 physical report; specimen identity, not a full supply-size list. / 2024 理化报告送检尺寸,不代表全部供货规格。
CREATEKING example [S6] / 厂家规格示例
Length 2.8 / 3 m; width 600 mm; thickness 8 / 9 mm
PVC-film finish. Reference to another manufacturer, not an ARCHORA model. / PVC 覆膜,为其他厂家示例,不是雅筑朗型号。
V COWOOD KM300 [S7] / 厂家规格示例
Section 300 × 12 mm; usual length 3 m
Different section; custom length is stated by that manufacturer. / 不同截面,其厂家说明可定制长度。
Acclimation reference [S8] / 环境适应参考
24–48 h
CREATEKING preparation guidance. Confirm the period for the supplied panel and site. / 来自其他厂家施工准备指南,本项目按实际供货及现场条件确认。
Online sources / 网络资料来源
  1. S1 · GB/T 24137-2009 — SAMR / 国家标准平台 ↗
  2. S2 · GB 18580-2025 — SAMR / 国家标准平台 ↗
  3. S3 · Formaldehyde limits / 新国标解读 — 国家林草局 ↗
  4. S4 · GB 8624-2025 — SAMR / 国家标准平台 ↗
  5. S5 · T/ZZB 1671-2025, tables 3–4 / 团体标准平台 ↗
  6. S6 · CREATEKING 600 mm bamboo-fibre wall panel / 厂家产品页 ↗
  7. S7 · V COWOOD KM300 / 维可森厂家产品页 ↗
  8. S8 · CREATEKING WPC installation / 厂家安装指南 ↗
  9. S9 · JGJ/T 478-2019 — publisher / 中国建筑标准设计网 ↗