400-880-4396 +86 138 8989 9165info@archoragroup.comJournalWhite papers & resources
ARCHORABuilding with Confidence, Protecting the Future.
← Back to series

ARCHORA / Archived test-report data

Bamboo–wood fibre panel · fire behaviour

竹木纤维板·燃烧性能

Product-specific tables, with the source and sample scope kept alongside each value.

Technical transcription · English / Chinese · 48 KB

Original Chinese PDF ↗
Bamboo–wood fibre panel · fire behaviour
AI application illustration. Confirm the supplied finish with a physical sample.

Scope of the data

Fire-test specimen: 300 × 2800 mm; report conclusion: B1. The physical-property report uses a different specimen size. Do not combine the two as a universal specification guarantee.

Source document
2024200315011500122 ·
Test basis
GB 8624-2012
Technical transcription · English / Chinese
PropertyUnitSource criterionRecorded result
Fire growth rate index FIGRA0.4MJ燃烧增长速率指数 FIGRA0.4MJW/s≤250226
Total heat release THR600s600s总放热量 THR600sMJ≤158
Lateral flame spread火焰横向蔓延Does not reach long-wing edgeDid not reach long-wing edge
Flame-tip height within 60 s60s内焰尖高度 Fsmm≤150<150
Filter-paper ignition by flaming droplets within 60 s60s内燃烧滴落物引燃滤纸No ignitionNo ignition

    Technical transcription · English / Chinese · 48 KB

    Original Chinese PDF ↗

    Original report pages

    Readable report reproductions are provided here; the original full PDFs remain available with the technical data.

    fire source report p.2fire source report p.3

    Panel systems: finishes, details & documents

    Explore four finish families and five component types, with application illustrations, original swatch references and a technical planning manual.

    Technical & installation manual

    21 pages · 6.7 MB · English / Chinese

    Download PDF ↓

    The reports describe individual tested specimens. They do not automatically certify every finish, thickness, trim or installed assembly.

    Standards & specification references

    Detailed guidance · English / Chinese · 2026-10-10

    External references for specification planning; these values are not Kangyi test results or an ARCHORA supply guarantee. T/ZZB values refer to the paper/film-faced category.

    外部资料用于选型与技术对标,不是康亿实测值或雅筑朗供货承诺;T/ZZB 指标对应纸膜类饰面。

    Standard editions & limits / 标准版本与限值
    GB/T 24137-2009
    Current wood-plastic decorative board standard; also the basis named in the 2024 physical report. [S1]
    现行木塑装饰板标准;亦为 2024 年理化报告所列依据。
    GB 18580-2025
    Effective 2026-06-01, replacing 2017. In its scope: wood-based panels ≤0.124 mg/m³ (E1); their finished products ≤0.050 mg/m³ (E0). Confirm classification and specimen preparation for the supplied material. [S2–S3]
    2026-06-01 实施并代替 2017 版;适用范围内,人造板限量 ≤0.124 mg/m³(E1),人造板制品 ≤0.050 mg/m³(E0)。供货材料的适用分类与制样要求须核实。
    GB 8624-2012 / 2025
    The 2024 fire report uses 2012. The 2025 edition takes effect on 2027-01-01; it is not yet in force on this review date. [S4]
    现有 2024 年燃烧报告依据 2012 版;2025 版于 2027-01-01 实施,本次检索日尚未实施。
    JGJ/T 478-2019
    Publisher lists it as current. Use the applicable interior-wall design, construction and acceptance provisions when developing the project system. [S9]
    出版方列为现行;项目构造设计应核对其中适用的室内墙面设计、施工与验收条款。

    Keep the 2024 results and original criteria unchanged. The 0.023 mg/m³ result does not itself establish E0/ENF certification or compliance under a later test edition.
    保留 2024 年实测结果与原报告判据;0.023 mg/m³ 数值本身不等于 E0/ENF 认证,也不能直接替代新版条件下的检测结论。

    14 industry benchmark parameters / 14 项行业对标参数

    T/ZZB 1671-2025 · Tables 3–4 [S5]. Paper / film-faced category. External reference, not an ARCHORA conformity claim. / 纸膜饰面类对标,不是本产品合格声明。

    Parameter / 项目UnitReference / 对标值
    Length deviation / 长度偏差mm0 to +3
    Thickness deviation / 厚度偏差mm±0.3
    Width deviation / 宽度偏差mm±1
    Diagonal difference / 对角线差mm≤3.5
    Flatness / 平整度mm≤0.5
    Assembled seam / 拼缝间距mm≤0.3
    Density / 密度g/cm³0.8–1.1
    Moisture content / 含水率%≤1.2
    Flexural strength / 抗弯强度MPaMean ≥20; minimum ≥16
    Flexural modulus / 抗弯弹性模量MPa≥1800
    Dimensional stability / 尺寸稳定性%≤0.4
    Shore hardness / 邵氏硬度HD≥58
    Thickness swelling / 吸水厚度膨胀率%≤0.3
    Surface bond / 表面胶合强度MPa≥0.5

    Kangyi recorded hardness: HD 57; benchmark: HD ≥58. Do not assume group-standard conformity. The assembled seam criterion is not a site movement allowance. / 康亿实测硬度 HD 57,对标值 HD ≥58,不能据此推定符合团体标准;拼缝指标不等于现场伸缩缝。

    Size & installation references / 规格与施工参考
    Recorded Kangyi specimen / 康亿送检规格
    2800 × 600 × 9 mm
    2024 physical report; specimen identity, not a full supply-size list. / 2024 理化报告送检尺寸,不代表全部供货规格。
    CREATEKING example [S6] / 厂家规格示例
    Length 2.8 / 3 m; width 600 mm; thickness 8 / 9 mm
    PVC-film finish. Reference to another manufacturer, not an ARCHORA model. / PVC 覆膜,为其他厂家示例,不是雅筑朗型号。
    V COWOOD KM300 [S7] / 厂家规格示例
    Section 300 × 12 mm; usual length 3 m
    Different section; custom length is stated by that manufacturer. / 不同截面,其厂家说明可定制长度。
    Acclimation reference [S8] / 环境适应参考
    24–48 h
    CREATEKING preparation guidance. Confirm the period for the supplied panel and site. / 来自其他厂家施工准备指南,本项目按实际供货及现场条件确认。
    Online sources / 网络资料来源
    1. S1 · GB/T 24137-2009 — SAMR / 国家标准平台 ↗
    2. S2 · GB 18580-2025 — SAMR / 国家标准平台 ↗
    3. S3 · Formaldehyde limits / 新国标解读 — 国家林草局 ↗
    4. S4 · GB 8624-2025 — SAMR / 国家标准平台 ↗
    5. S5 · T/ZZB 1671-2025, tables 3–4 / 团体标准平台 ↗
    6. S6 · CREATEKING 600 mm bamboo-fibre wall panel / 厂家产品页 ↗
    7. S7 · V COWOOD KM300 / 维可森厂家产品页 ↗
    8. S8 · CREATEKING WPC installation / 厂家安装指南 ↗
    9. S9 · JGJ/T 478-2019 — publisher / 中国建筑标准设计网 ↗