+86 138 8989 9165soniaw@126.comJournalWhite papers & resources
ARCHORABuilding with Confidence, Protecting the Future.

ARCHORA / Resource library

Open resource library

Product data summaries and practical guides for selecting architectural coatings. Read online or download immediately, without an email form.

10 resources found

Product data summariesExterior

Exterior Latex Paint

A smooth exterior wall finish for building facades and renovation specifications.

When to use this

Exterior walls. Discuss the substrate condition, color and compatible primer.

Key points

  • Discuss the substrate condition, color and compatible primer.
  • Theoretical coverage / consumption: Approximately 11 m²/L/coat
  • Recommended coats: 2 coats
Read online

A compiled product summary, not a formally issued TDS, SDS or certification.

Technical data

PropertyValueTest method / conditionsDocument basis
Surface-dry time1 hGB/T 9755-2014BETC-HJ-2024-P-00256 / 2024-05-26
Contrast ratio (white and light colours)0.92GB/T 9755-2014BETC-HJ-2024-P-00256 / 2024-05-26
Dirt pick-up resistance (white and light colours)8 %GB/T 9755-2014BETC-HJ-2024-P-00256 / 2024-05-26
Scrub resistanceNo damage after 2000 cyclesGB/T 9755-2014BETC-HJ-2024-P-00256 / 2024-05-26
Alkali resistanceNo abnormality after 48 hGB/T 9755-2014BETC-HJ-2024-P-00256 / 2024-05-26
Water resistanceNo abnormality after 96 hGB/T 9755-2014BETC-HJ-2024-P-00256 / 2024-05-26
Water permeability0.8 mLGB/T 9755-2014BETC-HJ-2024-P-00256 / 2024-05-26
Artificial weathering400 h; no blistering, peeling or cracking; chalking 0, colour change 0GB/T 9755-2014BETC-HJ-2024-P-00256 / 2024-05-26

Application & system

PropertyValueTest method / conditionsDocument basis
Theoretical coverage / consumptionApproximately 11 m²/L/coatSource documentManual V3 2026-07-09
Recommended coats2 coatsSource documentManual V3 2026-07-09
Application methodRoller or airless spraySource documentManual V3 2026-07-09
Application temperature5–35 °CSource documentManual V3 2026-07-09
Relative humidity≤85 %Source documentManual V3 2026-07-09
Recoat / clear-coat interval≥4 h at 25°CSource documentManual V3 2026-07-09

Source and scope

Original reports may show the manufacturer's other brand name. The company confirms that the corresponding ARCHORA products use the same formulation and specifications. Manufacturer's manual data is not an independent test report. Reported results apply to the submitted sample and stated test conditions; they do not establish performance on every job site or constitute international certification.

Published 4 October 2026 · PDF · English

Product data summariesExterior

Elastomeric Exterior Coating

An elastomeric coating option for exterior wall systems that require a flexible finish.

When to use this

Exterior wall coating systems. Describe the wall condition and any existing cracks so the preparation and coating approach can be reviewed.

Key points

  • Describe the wall condition and any existing cracks so the preparation and coating approach can be reviewed.
  • Theoretical coverage / consumption: 2.5–3.5 m²/kg
  • Recommended coats: 2 coats
Read online

A compiled product summary, not a formally issued TDS, SDS or certification.

Technical data

No verified test results are listed for this product. See the manufacturer’s application information below.

Application & system

PropertyValueTest method / conditionsDocument basis
Theoretical coverage / consumption2.5–3.5 m²/kgSource documentManual V3 2026-07-09
Recommended coats2 coatsSource documentManual V3 2026-07-09
Application methodRoller or airless spraySource documentManual V3 2026-07-09
Application temperature5–35 °CSource documentManual V3 2026-07-09
Relative humidity≤85 %Source documentManual V3 2026-07-09
Recoat / clear-coat interval4–6 h at 25°CSource documentManual V3 2026-07-09

Source and scope

Original reports may show the manufacturer's other brand name. The company confirms that the corresponding ARCHORA products use the same formulation and specifications. Manufacturer's manual data is not an independent test report. Reported results apply to the submitted sample and stated test conditions; they do not establish performance on every job site or constitute international certification.

Published 4 October 2026 · PDF · English

Product data summariesExterior

Solar Heat-Reflective Coating

A coating option for building surfaces where solar heat reflection is part of the specification.

When to use this

Exterior building surfaces. Discuss the exposure, substrate, color and relevant test documentation for the intended application.

Key points

  • Discuss the exposure, substrate, color and relevant test documentation for the intended application.
  • Theoretical coverage / consumption: 0.5–0.8 kg/m²
  • Recommended coats: 2–3 coats
Read online

A compiled product summary, not a formally issued TDS, SDS or certification.

Technical data

No verified test results are listed for this product. See the manufacturer’s application information below.

Application & system

PropertyValueTest method / conditionsDocument basis
Theoretical coverage / consumption0.5–0.8 kg/m²Source documentManual V3 2026-07-09
Recommended coats2–3 coatsSource documentManual V3 2026-07-09
Application methodAirless spray recommendedSource documentManual V3 2026-07-09
Application temperature5–35 °CSource documentManual V3 2026-07-09
Relative humidity≤85 %Source documentManual V3 2026-07-09
Recoat / clear-coat interval≥4 h at 25°CSource documentManual V3 2026-07-09

Source and scope

Original reports may show the manufacturer's other brand name. The company confirms that the corresponding ARCHORA products use the same formulation and specifications. Manufacturer's manual data is not an independent test report. Reported results apply to the submitted sample and stated test conditions; they do not establish performance on every job site or constitute international certification.

Published 4 October 2026 · PDF · English

Product data summariesExterior

Multicolor Stone-Effect Coating

A water-in-water decorative coating for multicolor, stone-like exterior finishes.

When to use this

Decorative exterior walls. Confirm the sample color, pattern scale, base color and supporting layers.

Key points

  • Confirm the sample color, pattern scale, base color and supporting layers.
  • Theoretical coverage / consumption: 0.4–0.8 kg/m²
  • Recommended coats: 1 coat
Read online

A compiled product summary, not a formally issued TDS, SDS or certification.

Technical data

PropertyValueTest method / conditionsDocument basis
Surface-dry time<4 hHG/T 4343-2012; GB/T 1728-1979, GB/T 9265-2009, GB/T 1733-1993, GB/T 9266-2009, GB/T 1865-2009 (as listed in the report)TL12L-240008 / 2024-07-10
Alkali resistance (composite coating)No abnormality after 48 hHG/T 4343-2012; GB/T 1728-1979, GB/T 9265-2009, GB/T 1733-1993, GB/T 9266-2009, GB/T 1865-2009 (as listed in the report)TL12L-240008 / 2024-07-10
Water resistance (composite coating)No abnormality after 96 hHG/T 4343-2012; GB/T 1728-1979, GB/T 9265-2009, GB/T 1733-1993, GB/T 9266-2009, GB/T 1865-2009 (as listed in the report)TL12L-240008 / 2024-07-10
Scrub resistance (composite coating)>2000 cyclesHG/T 4343-2012; GB/T 1728-1979, GB/T 9265-2009, GB/T 1733-1993, GB/T 9266-2009, GB/T 1865-2009 (as listed in the report)TL12L-240008 / 2024-07-10
Acid rain resistance (composite coating)No abnormality after 48 hHG/T 4343-2012; GB/T 1728-1979, GB/T 9265-2009, GB/T 1733-1993, GB/T 9266-2009, GB/T 1865-2009 (as listed in the report)TL12L-240008 / 2024-07-10
Dirt pick-up resistance (composite coating)1 gradeHG/T 4343-2012; GB/T 1728-1979, GB/T 9265-2009, GB/T 1733-1993, GB/T 9266-2009, GB/T 1865-2009 (as listed in the report)TL12L-240008 / 2024-07-10
Artificial weathering (composite coating)No blistering, peeling, cracking, chalking or obvious colour/gloss change after 1000 hHG/T 4343-2012; GB/T 1728-1979, GB/T 9265-2009, GB/T 1733-1993, GB/T 9266-2009, GB/T 1865-2009 (as listed in the report)TL12L-240008 / 2024-07-10

Application & system

PropertyValueTest method / conditionsDocument basis
Theoretical coverage / consumption0.4–0.8 kg/m²Source documentManual V3 2026-07-09
Recommended coats1 coatSource documentManual V3 2026-07-09
Application methodDedicated multicolor spray gunSource documentManual V3 2026-07-09
Application temperature5–35 °CSource documentManual V3 2026-07-09
Relative humidity≤85 %Source documentManual V3 2026-07-09
Recoat / clear-coat interval≥24 h before clear coat at 25°CSource documentManual V3 2026-07-09

Source and scope

Original reports may show the manufacturer's other brand name. The company confirms that the corresponding ARCHORA products use the same formulation and specifications. Manufacturer's manual data is not an independent test report. Reported results apply to the submitted sample and stated test conditions; they do not establish performance on every job site or constitute international certification.

Published 4 October 2026 · PDF · English

Product data summariesExterior

Textured Stone-Effect Coating

A sand-textured multicolor coating for a stone-like exterior appearance.

When to use this

Textured decorative facades. Review a physical sample to confirm the texture, color and intended surface effect.

Key points

  • Review a physical sample to confirm the texture, color and intended surface effect.
  • Theoretical coverage / consumption: 3.5–5 kg/m²
  • Recommended coats: 1 coat
Read online

A compiled product summary, not a formally issued TDS, SDS or certification.

Technical data

PropertyValueTest method / conditionsDocument basis
Surface-dry time3 hJG/T 24-2000, W typeBETC-HJ-2024-P-00257 / 2024-06-07 (issued); results dated 2024-06-01
Water resistanceNo blistering, cracking, peeling or colour change after 96 hJG/T 24-2000, W typeBETC-HJ-2024-P-00257 / 2024-06-07 (issued); results dated 2024-06-01
Alkali resistanceNo blistering, cracking, peeling or colour change after 96 hJG/T 24-2000, W typeBETC-HJ-2024-P-00257 / 2024-06-07 (issued); results dated 2024-06-01
Bond strength (standard condition)0.78 MPaJG/T 24-2000, W typeBETC-HJ-2024-P-00257 / 2024-06-07 (issued); results dated 2024-06-01
Bond strength after water immersion0.51 MPaJG/T 24-2000, W typeBETC-HJ-2024-P-00257 / 2024-06-07 (issued); results dated 2024-06-01
Dirt pick-up resistance (5 cycles)1 gradeJG/T 24-2000, W typeBETC-HJ-2024-P-00257 / 2024-06-07 (issued); results dated 2024-06-01
Temperature cycling resistanceNo chalking, cracking, peeling, blistering or colour change after 10 cyclesJG/T 24-2000, W typeBETC-HJ-2024-P-00257 / 2024-06-07 (issued); results dated 2024-06-01
Artificial weathering500 h; no cracking, blistering or peeling; chalking 0, colour change 0JG/T 24-2000, W typeBETC-HJ-2024-P-00257 / 2024-06-07 (issued); results dated 2024-06-01

Application & system

PropertyValueTest method / conditionsDocument basis
Theoretical coverage / consumption3.5–5 kg/m²Source documentManual V3 2026-07-09
Recommended coats1 coatSource documentManual V3 2026-07-09
Application methodDedicated stone-effect spray gunSource documentManual V3 2026-07-09
Application temperature5–35 °CSource documentManual V3 2026-07-09
Relative humidity≤85 %Source documentManual V3 2026-07-09
Recoat / clear-coat interval≥48 h before clear coatSource documentManual V3 2026-07-09

Source and scope

Original reports may show the manufacturer's other brand name. The company confirms that the corresponding ARCHORA products use the same formulation and specifications. Manufacturer's manual data is not an independent test report. Reported results apply to the submitted sample and stated test conditions; they do not establish performance on every job site or constitute international certification.

Published 4 October 2026 · PDF · English

Product data summariesExterior

Alkali-Resistant Sealing Primer

A supporting primer used before the specified wall coating finish.

When to use this

Wall coating preparation. Match the primer to the substrate and the selected finish; confirm preparation requirements.

Key points

  • Match the primer to the substrate and the selected finish; confirm preparation requirements.
  • Theoretical coverage / consumption: 0.10–0.15 kg/m²
  • Recommended coats: 1 coat
Read online

A compiled product summary, not a formally issued TDS, SDS or certification.

Technical data

PropertyValueTest method / conditionsDocument basis
Surface-dry time (alkali-resistant sealer)1 hGB/T 9755-2014, Table 1, exterior primer type IIBETC-HJ-2024-P-00255 / 2024-04-24
Alkali resistance (alkali-resistant sealer)No abnormality after 48 hGB/T 9755-2014, Table 1, exterior primer type IIBETC-HJ-2024-P-00255 / 2024-04-24
Water resistance (alkali-resistant sealer)No abnormality after 96 hGB/T 9755-2014, Table 1, exterior primer type IIBETC-HJ-2024-P-00255 / 2024-04-24
Water permeability (alkali-resistant sealer)0.5 mLGB/T 9755-2014, Table 1, exterior primer type IIBETC-HJ-2024-P-00255 / 2024-04-24
Efflorescence resistance (alkali-resistant sealer)No abnormality after 48 hGB/T 9755-2014, Table 1, exterior primer type IIBETC-HJ-2024-P-00255 / 2024-04-24
Surface-dry time (anti-fungal variant)<2 hGB/T 1728-1979(1989)TL226-240939 / 2024-07-02
Fungal resistance (anti-fungal variant)0 gradeGB/T 1741-2007, 28-day culture-dish methodTL226-240939 / 2024-07-02
Water permeability (anti-fungal variant)0.3 mLJG/T 210-2018TL226-240939 / 2024-07-02
Efflorescence resistance (anti-fungal variant)No abnormality after 120 hJG/T 210-2018TL226-240939 / 2024-07-02

Application & system

PropertyValueTest method / conditionsDocument basis
Theoretical coverage / consumption0.10–0.15 kg/m²Source documentManual V3 2026-07-09
Recommended coats1 coatSource documentManual V3 2026-07-09
Application methodBrush, roller or spraySource documentManual V3 2026-07-09
Application temperature5–35 °CSource documentManual V3 2026-07-09
Relative humidity≤85 %Source documentManual V3 2026-07-09
Recoat / clear-coat intervalAllow to dry fully; typically 4–12 h depending on weatherSource documentManual V3 2026-07-09

Source and scope

Original reports may show the manufacturer's other brand name. The company confirms that the corresponding ARCHORA products use the same formulation and specifications. Manufacturer's manual data is not an independent test report. Reported results apply to the submitted sample and stated test conditions; they do not establish performance on every job site or constitute international certification.

Published 4 October 2026 · PDF · English

Product data summariesInterior

Washable Interior Latex Paint

A washable interior wall finish for residential and commercial spaces.

When to use this

Interior walls. Discuss the room use, substrate, color, finish and cleaning requirements.

Key points

  • Discuss the room use, substrate, color, finish and cleaning requirements.
  • Theoretical coverage: Approximately 12 m²/L/coat
  • Recommended coats: 1–2 coats
Read online

A compiled product summary, not a formally issued TDS, SDS or certification.

Technical data

PropertyValueTest method / conditionsDocument basis
VOC92 g/LGB 18582-2008 (as printed in the report); no US EPA 24 claimBETC-HJ-2024-D-00258 / 2024-05-27
Free formaldehyde21 mg/kgGB 18582-2008 (as printed in the report); no US EPA 24 claimBETC-HJ-2024-D-00258 / 2024-05-27
Soluble lead5 mg/kgGB 18582-2008 (as printed in the report); no US EPA 24 claimBETC-HJ-2024-D-00258 / 2024-05-27
Sum of benzene, toluene, ethylbenzene and xylenesNot detected (limit 50 mg/kg)GB 18582-2008 (as printed in the report); no US EPA 24 claimBETC-HJ-2024-D-00258 / 2024-05-27
Soluble cadmium, chromium and mercuryNot detectedGB 18582-2008 (as printed in the report); no US EPA 24 claimBETC-HJ-2024-D-00258 / 2024-05-27

Application & system

PropertyValueTest method / conditionsDocument basis
Theoretical coverageApproximately 12 m²/L/coatSource documentManual V2 2026-07-09
Recommended coats1–2 coatsSource documentManual V2 2026-07-09
Application methodRoller or airless spraySource documentManual V2 2026-07-09
Minimum application temperature10 °CSource documentManual V2 2026-07-09
Maximum relative humidity80 %Source documentManual V2 2026-07-09
Recoat interval≥2 h at 25°CSource documentManual V2 2026-07-09
Cure before heavy cleaning14 daysSource documentManual V2 2026-07-09

Source and scope

Original reports may show the manufacturer's other brand name. The company confirms that the corresponding ARCHORA products use the same formulation and specifications. Manufacturer's manual data is not an independent test report. Reported results apply to the submitted sample and stated test conditions; they do not establish performance on every job site or constitute international certification.

Published 4 October 2026 · PDF · English

Practical guidesGeneral

How to read coating data and test reports

Understand what a product summary, TDS, SDS and test report can tell you.

When to use this

For buyers and project teams comparing documents before selecting a coating.

Key points

  • Check the exact product and document revision.
  • Read each result together with its method and sample conditions.
  • Keep application guidance and independent test results separate.
Read online

Start with the product identity

Match the product name, model and intended use to the material being considered. Original manufacturer reports may use another brand name; the company has confirmed that the corresponding ARCHORA products use the same formulation and specifications.

Read the evidence with the result

A test value belongs to a submitted sample and stated test method. Compare like-for-like methods and conditions. A result in one report does not by itself establish performance at every site or international certification.

Use each document for its purpose

The TDS describes product use and application information. The SDS addresses hazards, handling and protective measures. A test report records results under its stated conditions. This library’s compiled summaries identify their sources and do not replace formally issued documents.

Before specification

Confirm the current document revision and any unlisted data with the technical team. Keep the agreed substrate, system and site conditions with the project record.

Source and scope

Editorial learning guide based on ARCHORA Product Manual V3 (2026-07-09) and the document types described in this resource library. Quantity formulas are arithmetic planning aids.

Published 4 October 2026 · PDF · English

Practical guidesGeneral

Plan the complete coating system

A practical sequence from substrate assessment to the approved finish sample.

When to use this

For a new facade or refurbishment brief, before ordering separate coating layers.

Key points

  • Identify the substrate and its condition.
  • Confirm preparation, compatible primer and finish together.
  • Approve the colour and texture on a physical sample.
Read online

Define the starting surface

Record whether the work is interior or exterior, the substrate, its present condition, the area and exposure conditions. Include existing coatings when planning refurbishment.

Confirm the layer sequence

The manual’s sequence is substrate assessment, preparation and levelling, compatible primer, then the finish. Add a protective topcoat only where the selected system requires it.

Make the sample part of selection

Screen colour and texture images are indicative. Confirm the appearance with a physical sample and agree the substrate and application method for the project.

Keep the application information product-specific

Use the product’s own temperature, humidity, coat count and recoat information. Do not transfer one product’s coverage or timing to every layer in the system.

Source and scope

Editorial learning guide based on ARCHORA Product Manual V3 (2026-07-09) and the document types described in this resource library. Quantity formulas are arithmetic planning aids.

Published 4 October 2026 · PDF · English

Practical guidesGeneral

From theoretical coverage to a purchase estimate

Keep coverage, consumption, coat count and purchasing units consistent.

When to use this

For early material planning and a clearer quantity enquiry.

Key points

  • Check whether the unit is m²/L/coat or kg/m².
  • Include the number of coats in the calculation.
  • Confirm practical consumption and packaging before ordering.
Read online

Read the unit first

Coverage expressed in m²/L/coat is an area covered by one litre in one coat. Consumption expressed in kg/m² is a mass per area. Do not interchange litres and kilograms without a confirmed product density.

Calculate on a consistent basis

For coverage in m²/L/coat, theoretical litres = area × number of coats ÷ coverage. If consumption is given per coat, multiply by coat count; if it is stated for the full system, do not count the coats again.

Confirm the purchase quantity

Theoretical values do not include every site loss. Substrate absorption, texture and application method can affect practical use. Share the area, substrate, desired finish and packaging requirements with the technical team before fixing the purchase quantity.

Source and scope

Editorial learning guide based on ARCHORA Product Manual V3 (2026-07-09) and the document types described in this resource library. Quantity formulas are arithmetic planning aids.

Published 4 October 2026 · PDF · English

Related learning

Questions about these resources

Do I need to leave an email address?

No. All resources listed here can be read and downloaded directly.

Are the summaries formal TDS or SDS documents?

No. They are public summaries compiled from the stated manual and test evidence. Request the current formally issued TDS or SDS for product-specific project use.

Why do original reports show another brand?

The company has confirmed that the corresponding ARCHORA products and the original manufacturer-branded samples use the same formulation and specifications.

Can a screen image confirm the final colour?

No. Confirm colour and texture with a physical sample under the intended viewing conditions.

Technical support ↗