Alkali-Resistant Sealing Primer
A supporting primer used before the specified wall coating finish.
| Product code | KY-1060 |
| Application | Wall coating preparation |
Before specifying
Match the primer to the substrate and the selected finish; confirm preparation requirements.
Confirm the substrate, exposure conditions, coating system and current product documents before specifying a product.
Technical data
| Property | Value | Test method / conditions | Document basis |
|---|---|---|---|
| Surface-dry time (alkali-resistant sealer) | 1 h | GB/T 9755-2014, Table 1, exterior primer type II | BETC-HJ-2024-P-00255 / 2024-04-24 |
| Alkali resistance (alkali-resistant sealer) | No abnormality after 48 h | GB/T 9755-2014, Table 1, exterior primer type II | BETC-HJ-2024-P-00255 / 2024-04-24 |
| Water resistance (alkali-resistant sealer) | No abnormality after 96 h | GB/T 9755-2014, Table 1, exterior primer type II | BETC-HJ-2024-P-00255 / 2024-04-24 |
| Water permeability (alkali-resistant sealer) | 0.5 mL | GB/T 9755-2014, Table 1, exterior primer type II | BETC-HJ-2024-P-00255 / 2024-04-24 |
| Efflorescence resistance (alkali-resistant sealer) | No abnormality after 48 h | GB/T 9755-2014, Table 1, exterior primer type II | BETC-HJ-2024-P-00255 / 2024-04-24 |
| Surface-dry time (anti-fungal variant) | <2 h | GB/T 1728-1979(1989) | TL226-240939 / 2024-07-02 |
| Fungal resistance (anti-fungal variant) | 0 grade | GB/T 1741-2007, 28-day culture-dish method | TL226-240939 / 2024-07-02 |
| Water permeability (anti-fungal variant) | 0.3 mL | JG/T 210-2018 | TL226-240939 / 2024-07-02 |
| Efflorescence resistance (anti-fungal variant) | No abnormality after 120 h | JG/T 210-2018 | TL226-240939 / 2024-07-02 |
Original reports may show the manufacturer's other brand name. The company confirms that the corresponding ARCHORA products use the same formulation and specifications.
Manufacturer's manual data is not an independent test report. Reported results apply to the submitted sample and stated test conditions; they do not establish performance on every job site or constitute international certification.
Application & system
| Property | Value | Test method / conditions | Document basis |
|---|---|---|---|
| Theoretical coverage / consumption | 0.10–0.15 kg/m² | Source document | Manual V3 2026-07-09 |
| Recommended coats | 1 coat | Source document | Manual V3 2026-07-09 |
| Application method | Brush, roller or spray | Source document | Manual V3 2026-07-09 |
| Application temperature | 5–35 °C | Source document | Manual V3 2026-07-09 |
| Relative humidity | ≤85 % | Source document | Manual V3 2026-07-09 |
| Recoat / clear-coat interval | Allow to dry fully; typically 4–12 h depending on weather | Source document | Manual V3 2026-07-09 |
Confirm the full system for the substrate and project conditions. A protective topcoat is not required for every product.
Documents
Product bulletin / TDS
Product properties, uses, application conditions and storage instructions.
Safety data sheet (SDS)
Hazards, handling, protective measures and other safety information.
Test report
Results for the submitted sample under the stated test conditions.
Website data summary; not a formally issued TDS.
Contact us to confirm the latest TDS and any data not listed here.