Solar Heat-Reflective Coating
A coating option for building surfaces where solar heat reflection is part of the specification.
| Product code | KY-1030 |
| Application | Exterior building surfaces |
Before specifying
Discuss the exposure, substrate, color and relevant test documentation for the intended application.
Confirm the substrate, exposure conditions, coating system and current product documents before specifying a product.
Technical data
Contact us to confirm the latest TDS and any data not listed here.
Original reports may show the manufacturer's other brand name. The company confirms that the corresponding ARCHORA products use the same formulation and specifications.
Manufacturer's manual data is not an independent test report. Reported results apply to the submitted sample and stated test conditions; they do not establish performance on every job site or constitute international certification.
Application & system
| Property | Value | Test method / conditions | Document basis |
|---|---|---|---|
| Theoretical coverage / consumption | 0.5–0.8 kg/m² | Source document | Manual V3 2026-07-09 |
| Recommended coats | 2–3 coats | Source document | Manual V3 2026-07-09 |
| Application method | Airless spray recommended | Source document | Manual V3 2026-07-09 |
| Application temperature | 5–35 °C | Source document | Manual V3 2026-07-09 |
| Relative humidity | ≤85 % | Source document | Manual V3 2026-07-09 |
| Recoat / clear-coat interval | ≥4 h at 25°C | Source document | Manual V3 2026-07-09 |
Confirm the full system for the substrate and project conditions. A protective topcoat is not required for every product.
Documents
Product bulletin / TDS
Product properties, uses, application conditions and storage instructions.
Safety data sheet (SDS)
Hazards, handling, protective measures and other safety information.
Test report
Results for the submitted sample under the stated test conditions.
Website data summary; not a formally issued TDS.
Contact us to confirm the latest TDS and any data not listed here.