400-880-4396 +86 138 8989 9165info@archoragroup.comJournalWhite papers & resources
ARCHORABuilding with Confidence, Protecting the Future.
← Back to series

ARCHORA / Archived test-report data

Inorganic mineral interior coating

无机矿物内墙涂料

Product-specific tables, with the source and sample scope kept alongside each value.

Technical transcription · English / Chinese · 61 KB

Original Chinese PDF ↗
Inorganic mineral interior coating
Application illustration · confirm finish with a physical sample.

Scope of the data

Submitted white liquid sample, premium grade, SIZEN. Not detected means below the stated detection limit, not absolute zero. Standard editions are those printed in the archived report.

Source document
TL16L-240005 ·
Test basis
GB/T 9756-2018; GB 18582-2008
Technical transcription · English / Chinese
PropertyUnitSource criterionRecorded result
Free formaldehyde游离甲醛Detection limit: 5 mg/kgmg/kg≤100Not detected
Volatile organic compounds (VOC)挥发性有机化合物含量(VOC)Detection limit: 2 g/Lg/L≤120Not detected
Sum of benzene, toluene, ethylbenzene and xylenes苯、甲苯、乙苯、二甲苯总和Limits: benzene/toluene/ethylbenzene/o-xylene 2 mg/kg each; m-/p-xylene 4 mg/kgmg/kg≤300Not detected
Soluble lead (Pb)可溶性铅Detection limit: 1 mg/kgmg/kg≤90Not detected
Soluble cadmium (Cd)可溶性镉Detection limit: 0.4 mg/kgmg/kg≤75Not detected
Soluble chromium (Cr)可溶性铬Detection limit: 2 mg/kgmg/kg≤60Not detected
Soluble mercury (Hg)可溶性汞Detection limit: 0.007 mg/kgmg/kg≤60Not detected
Condition in container在容器中状态No hard lumps; uniform after stirringNo hard lumps; uniform after stirring
Application properties施工性Two brush coats without difficultyTwo brush coats without difficulty
Low-temperature stability (3 cycles)低温稳定性(3次循环)No deteriorationNo deterioration
Low-temperature film formation低温成膜性Normal film formation at 5°CNormal film formation at 5°C
Film appearance涂膜外观NormalNormal
Surface-dry time干燥时间(表干)h≤2<2
Alkali resistance (24 h)耐碱性(24h)No abnormalityNo abnormality
Contrast ratio (white and light colours)对比率(白色和浅色)≥0.950.95
Wet-scrub resistance耐洗刷性cycles≥6000>6000
  • Free formaldehyde: Detection limit: 5 mg/kg
  • Volatile organic compounds (VOC): Detection limit: 2 g/L
  • Sum of benzene, toluene, ethylbenzene and xylenes: Limits: benzene/toluene/ethylbenzene/o-xylene 2 mg/kg each; m-/p-xylene 4 mg/kg
  • Soluble lead (Pb): Detection limit: 1 mg/kg
  • Soluble cadmium (Cd): Detection limit: 0.4 mg/kg
  • Soluble chromium (Cr): Detection limit: 2 mg/kg
  • Soluble mercury (Hg): Detection limit: 0.007 mg/kg

Technical transcription · English / Chinese · 61 KB

Original Chinese PDF ↗