400-880-4396 +86 138 8989 9165info@archoragroup.comJournalWhite papers & resources
ARCHORABuilding with Confidence, Protecting the Future.
← All products

ARCHORA / Exterior coatings / KY-1100

Water-based clear protective topcoat

A transparent finishing coat for compatible stone-effect, textured and metallic coating systems; apply over a fully dried base finish.

Original Chinese brochure · 6 pages · 4.1 MB

Water-based clear protective topcoat — Application illustrations
AI application illustrations from the product handbook. Confirm the finish with a physical sample.
01

Technical parameters

Source: supplied ARCHORA printed product handbook. PDF page 68. Manufacturer brochure data. Listed methods are reproduced as printed; this table is not an independent laboratory report.

PropertyMethod listed in brochureBrochure criterionBrochure result
Condition in containerGB/T 9755No lumps; uniformPass
Application workabilityGB/T 9755No application difficultyNo application difficulty
Low-temperature stabilityGB/T 9268No changeNo change
Surface-dry timeGB/T 1728≤2 h<2 h
Dirt pick-up resistanceGB/T 9780≤20%17%
Alkali resistanceGB/T 9265 / ASTM D-130848 h; No abnormalityNo abnormality
Water resistanceGB/T 173396 h; No abnormalityNo abnormality
Temperature cyclingJG/T 25 / ASTM E-24853 cycles; No abnormalityNo abnormality
Water permeabilityGB/T 9755≤1.4 mL0.1 mL
Artificial weatheringGB/T 1865 / ASTM G-154250 h; No blistering, peeling or crackingPass
Chalking after ageingGB/T 1865≤1 Grade0 Grade
Colour change after ageingGB/T 1865≤2 Grade0 Grade
02

Application illustrations

AI application illustrations from the product handbook. Confirm the finish with a physical sample.

Colour & texture references

Water-based clear protective topcoat — Colour & texture references

Brochure colour and texture references; screen appearance is indicative. Confirm against a physical sample.

03

Coating system

Water-based clear protective topcoat — Coating system
Original system diagram (Chinese labels). Layer thicknesses are illustrative.

Typical layer sequence. Confirm the complete substrate-specific system before application.

  1. Concrete / cement render
  2. Flexible exterior putty
  3. Alkali-resistant sealer
  4. Matching colour basecoat
  5. Product finish coat
  6. Compatible clear topcoat
04

Application & specification

PropertyBrochure valuePDF page
Theoretical consumption / coverage0.10–0.15 kg/m²68
Packaging stated in brochure5 gal / 19 L68
Shelf life stated in brochureUnopened: 24 months68
Read the original system, technical and installation pages

Original Chinese pages, including complete preparation, specification, application and storage instructions. Open an image to read it at full size.

System features · PDF page 67
Water-based clear protective topcoat — System features · PDF page 67
Product bulletin · PDF page 68
Water-based clear protective topcoat — Product bulletin · PDF page 68
Guide specification · PDF page 69
Water-based clear protective topcoat — Guide specification · PDF page 69
Application & installation · PDF page 70
Water-based clear protective topcoat — Application & installation · PDF page 70
05

Documents & downloads

KY-1100 · Water-based clear protective topcoat

Original Chinese brochure · 6 pages · 4.1 MB

Download complete handbook ↓

Original Chinese brochure · 80 pages · 50.0 MB

Discuss this product ↗

Technical data & source documents

Technical transcription · English / Chinese · 38 KB

Original Chinese PDF ↗